简体中文

Welcome to Jiujiang fire fighting equipment Co., Ltd 

ENGLISH

jjxf@jjxf.com.cn

400-0792-119

Follow us

ADD:No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
TEL:400-0792-119
FAX:0792-8578766
E-MAIL:
jjxf@jjxf.com.cn

CONTACT US

Jiujiang fire fighting equipment Co., Ltd  © CopyRights

Jiujiang fire fighting equipment Co., Ltd 

>
>
>
Heavy-duty support kit HS15/0.8

Products

Name

Heavy-duty support kit HS15/0.8

I want to make an inquiry
Parameters
Performance
Instructions
Precautions
The video
Corresponding parameter set not found, please add it in property template of background

Pneumatic support rod basic parameters                    

Product specification   QZG600   QZG880 QZG1400
Initial length (mm) 600±5 880±5 1400±5
Stretch length (mm) 880±5 1400±5 2350±5
Weight (Kg) ≤8 ≤10.6  ≤15.5
Pneumatic telescopic stroke (mm)  280±5  520±5 950±5
Pneumatic support lift (KN) 3 3 3
Safe Work Support (KN) 150 150 150
Pneumatic working pressure (MPa)  0.8 0.8 0.8

Handheld pneumatic controller basic parameters

Product specification SKQ-II

Weight (Kg) ≤1.5

Working pressure (MPa) 0.8

HS15/0.8 heavy-duty support kits are suitable for emergency rescue tools such as earthquakes, landslides, tunnels,

mudslides, landslides, and various traffic accidents. Can be used singly or with three supports

The pole connection base connects the three jacks together to increase the supporting force; in addition, multiple

jacks can be connected into a tripod for rescue lifting or lifting.
 

I, the use of manual operation

a) According to the needs of the rescue site, select the appropriate length of support rod.

b) Pneumatic support rod rises: Place the support rod on the place where it needs to be supported and pull it out by

hand until it stops at the desired position. At this time, the pneumatic support is locked and you can start working.

c) Pneumatic support rod descends: Press the manual operation button (red button) on the support rod. At this time,

the support rod support lock is released, the support rod begins to descend, and release the button to stop the fall.

II, pneumatic remote operation

a)Connect the gas source (gas cylinder) to the pressure relief valve, and then connect it to the hand-held pneumatic

controller through the 5m blue gas pipeline;

b) Connect the hand-held pneumatic controller to the gas pipeline (10m) and the support kit in sequence; the blue gas

pipe is connected to the strut and the air intake is quickly connected; the red gas pipe is connected to the strut to

control the quick connection;

c) Before use, first open the gas source (gas cylinder) switch, observe the pressure rise (usually air bottle pressure

is 30MPa), reduce the pressure to 0.8MPa through the pressure reducing valve, then hold the pneumatic remote control

In the operable state (the upper two buttons of the hand-held pneumatic controller are the gas supply button, and the

lower two buttons are the pressure relief button);

d) Pneumatic support rod rises: Press the air supply button of the blue trachea connection. The pneumatic support rod

is extended and lengthened to the desired height. Release the button to stop and automatically lock the support.

e) Pneumatic support rod descends: press the gas supply button of the red tubing connection → release the support

lock automatically → press the relief button → discharge the gas from the blue tubing connection → the support rod

begins to descend → down

When the gas is lowered to the required height, the gas in the pneumatic control room is exhausted (press the red

connection line pressure relief button) → the support rod will automatically lock.

Note: When both ends of the support bar are subjected to a load of more than 30 kg, the support bar must not be

lowered or retracted in any form (manual operation, pneumatic remote operation), and must be removed at both ends

of the support bar.

 can be operated, if you violate this operation, the company will not bear the resulting damage or loss.

1. When the connection procedure is completed, it is strictly prohibited to step on the gas pipe.

2. When supplying gas, the gas should be supplied at a constant speed and slowly. The on-site operator should always

observe the presence or absence of abnormal conditions and make proper disposal. It is strictly forbidden for gas

operators to not listen to the on-site operator to instruct the gas supply and pressure relief.

3, before the supply of gas should be done by the anti-skid objects and non-slip pad and follow-up protection work.

暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article