简体中文

Welcome to Jiujiang fire fighting equipment Co., Ltd 

ENGLISH

jjxf@jjxf.com.cn

400-0792-119

Follow us

ADD:No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
TEL:400-0792-119
FAX:0792-8578766
E-MAIL:
jjxf@jjxf.com.cn

CONTACT US

Jiujiang fire fighting equipment Co., Ltd  © CopyRights

Jiujiang fire fighting equipment Co., Ltd 

>
>
>
Semi-fixed (lightweight) foam fire extinguishing device PY 7/10

Products

Name

Semi-fixed (lightweight) foam fire extinguishing device PY 7/10

I want to make an inquiry
Parameters
Performance
Instructions
Precautions
The video
Corresponding parameter set not found, please add it in property template of background

Dimensions 350×280×460 (mm)

Tank volume 10 (L)

Mixed liquor flow 7L/S

Maximum/minimum working pressure 0.7/0.3(MPa)

Range:

In the case of an inlet pressure of 0.7Mpa: low times: ≥12M, high times: ≥3M  

Time:   Ф1     168

        Ф2     11.5

        Ф3     3.5

        Ф4     2.15

This product implements the GB20031-2005 Standard for Foam Fire Extinguishing Systems and Components General

Specifications.

The foam fire extinguishing device has the characteristics of small volume, light weight, easy operation, flexible

and reliable, and convenient storage and transportation. Especially suitable for oil fields, oil depots, airports,

docks, large buildings, petrochemicals

The toxic and hazardous flammable and explosive high-risk places such as the old districts and underground shopping

mall facilities, which are difficult for tankers and fire engines to enter, are indispensable equipment for fire

safety supporting facilities.

 
working principle:

The pressured water flows through the water gun to form a negative pressure, and the foam liquid is pumped in one

direction. According to the need, the foam gun and the self-priming joint may be used to spray the foam liquid, so

as to achieve the fire-extinguishing effect.

1. Add the foam liquid to the foam container and tightly seal the lid.

2, select a good quantitative connector, the gun on the quick connector, connected to the quantitative connector.

3. Connect the water hose interface of the water gun to the water source (eg fire-fighting motorized water pump,

water tanker, etc.).

4. Open the water source and turn the water gun switch on to start the fire extinguishing operation.

1, according to the job site need to replace the quantitative connector (Φ1-Φ4).

2. After use, the foam solution in the device should be cleaned.

3, stored in a dry environment.
 

暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article