简体中文

Welcome to Jiujiang fire fighting equipment Co., Ltd 

ENGLISH

jjxf@jjxf.com.cn

400-0792-119

Follow us

ADD:No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
TEL:400-0792-119
FAX:0792-8578766
E-MAIL:
jjxf@jjxf.com.cn

CONTACT US

Jiujiang fire fighting equipment Co., Ltd  © CopyRights

Jiujiang fire fighting equipment Co., Ltd 

>
>
>
Non-damage hose fastening device SSK-4

Products

Name

Non-damage hose fastening device SSK-4

I want to make an inquiry
Parameters
Performance
Instructions
Precautions
The video
Corresponding parameter set not found, please add it in property template of background

Operating time: ≤ 2Min

Hydraulic performance: The interface does not show visible cracks or breakage at 1.5 times nominal pressure water

pressure. The interface should be able to use normally after hydrostatic strength test.

Size: 515x220x490 (Length x Width x Height) mm

Applicable interface: KDK65Z、KDK80Z/KDK65/KDK80

SSK-4 non-destructive water-tape fastening device is a commonly used water-strap fastening device in firefighting

work, which enables the fastening connection between the water belt and the inner buckle type interface. Its product

structure is beautiful, and it can be reused and installed conveniently.

Fastening male interface:

1. First, fix the non-destructive water-tape fastening device to the fixture, and pull out the female interface in

the quick interface of the device to be assembled; 

2, the metal locking sleeve, reinforced nylon sleeve and fire hose, and then put the fire hose on the hose interface,

as shown below;

3. Docking the female interface of the card interface with the quick-connect interface, and inserting the tight

sleeve into the locking sleeve, positioning the positioning block at the following figure, and then fastening the

locking sleeve with the fastening plate;

4. After rotating the crank clockwise one clock, remove the fixed card, and then continue to rotate the handle to

lock the root of the interface, then turn it half a turn to normal use;

5, when dismantling, the operation can be reversed.

Fastening female interface:

1. Firstly fix the non-destructive water-tape fastening device to the fixture, and return the male interface of the

device's quick interface to the bottom to be assembled;

2, the metal locking sleeve, reinforced nylon sleeve and fire hose, and then put the fire hose on the hose interface,

as shown below;

3. Docking the female interface of the card interface with the quick-connect interface, and inserting the tight

sleeve into the locking sleeve, positioning the positioning block at the following figure, and then fastening the

locking sleeve with the fastening plate;

4. After rotating the crank clockwise one clock, remove the fixed card, and then continue to rotate the handle to

lock the root of the interface, then turn it half a turn to normal use;

5, when dismantling, the operation can be reversed.

1. It is recommended to clean it after use, store it after ventilating and drying.

2, should be stored in a ventilated, dry environment, storage can not be mixed with acids and alkalis and other

chemicals.

暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article