简体中文

Welcome to Jiujiang fire fighting equipment Co., Ltd 

ENGLISH

jjxf@jjxf.com.cn

400-0792-119

Follow us

ADD:No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
TEL:400-0792-119
FAX:0792-8578766
E-MAIL:
jjxf@jjxf.com.cn

CONTACT US

Jiujiang fire fighting equipment Co., Ltd  © CopyRights

Jiujiang fire fighting equipment Co., Ltd 

Products

Name

Fire Robot RXR-MC40D

I want to make an inquiry
Parameters
Performance
Instructions
Precautions
The video
Corresponding parameter set not found, please add it in property template of background

item

parameters

Walk form

Caterpillar type

 

Body size(chassis)

length

1100mm

Width

780mm

height

890mm

Total weight

≤170kg

Wireless remote control distance

≤150m

Walk speed(forward/backward)

0~0.9m/s

Turning radius

0

Maximum crossing height of vertical barrier

150mm

gradeability

≤30°

Fording depth

100mm以内

Continuous working time

≤2h

Performance

Horizontal angle

±90°

Elevation angle

30°~70°

Spray form

straight/mist

flow

40 L/s

Working pressure

0.8MPa

Range

65m

Joint for fire monitor

KYKA80Z

Ability to drag

3 rolls of hose(80) with full water, 8 rolls without water

Operating environment temperature

-30°~+120°

Flammable gas detection

Slightly dangerous while concentration is below 25%,serious dangerous while above 50%

Transmission way of video or photo.

Where 4G signal is available

Battery voltage

48V  

 

This product adopts rubber crawler-type walking mechanism. The front and rear of the fuselage are equipped with an

infrared wide-angle video camera. The fire extinguishing robot can be controlled according to the video transmitted

from the camera to the control platform.

This product adopts wireless remote control and is driven by a maintenance-free battery pack. It can continuously

drag three high-pressure water hoses to a designated position to provide effective self-protection for fire fighting

operations.

1. Connect the hose with the fire monitor;

2, open the robot site "power switch" switch;

3, the image transmission, digital transmission antenna corresponding plug, and then open the rear control platform

computer;

4, the corresponding plug in the wireless network card, you can connect to the network;  

5. Double-click on the “Robot Control Software” icon on the screen. An interface will appear. Through this

interface, you can observe the robot's working status.

6, if you want to operate the robot, click the "red flag" kind of software, then enter the next interface 

7. Then, the locomotive is moved to the required working area through the locomotive control lever on the rear

control platform to deliver water and carry out fire extinguishing operations.

 8. When the fire extinguishing operation is carried out, the status and direction of the water flow can be adjusted

by the video transmitted from the front and rear cameras of the fire fighting robot to the rear control platform.

To observe the camera shooting an image, do the following:

1) After double-clicking on the "DSS" button, click on "Login" and click on the touch-screen pen in the right figure. 

2) Click the platform connection of the screen, double-click "implement preview" to enter an interface, and then

click "car platform" on the right, you can see the images taken by the camera.    

9. After the operation is completed, stop the water supply and remove the hose, and return the robot to its original

position.

10. Turn off the switches on the robot, the main switch, and the rear control platform.

11. Cars can be climbed and operated on vehicles. The height of the vehicle platform is ≤ 1 meter.

1. When working, personnel should keep away from the locomotive to ensure personal safety.

2, non-professional maintenance personnel do not open the control box.

3, do not close to the fuselage when starting the fire extinguishing robot.

4. When closing the rear control platform, the antennas and touch screen pens should be placed in turn before turning

off the computer and the power switch.

5, before and after the fire robot to haul heavy objects.

6, charge time is 6 to 8 hours.

7. The digital transmission antenna and the image transmission antenna should be connected to the corresponding

interface and must not be connected incorrectly.

暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article