Welcome to Jiujiang fire fighting equipment Co., Ltd
ADD：No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
Jiujiang fire fighting equipment Co., Ltd © CopyRights
Jiujiang fire fighting equipment Co., Ltd
Portable explosion-proof searchlight BJF9003
Rated operating voltage 14.8V
Battery rated capacity 2000mAh
Light source current 700mA
Light source flux ≥138LM
The average life of the light source ≥30000h
Signal lamp current 20mA
Battery life ≥1000 Cycle times
Continuous discharge time Glare>2.5h low light>3.5h
Charging time (after the battery is exhausted) ≤4 h
Length of appearance 157 mm
width of appearance 62mm
Height of appearance 108mm
Brightness >6000 LUX
Low brightness >4000 LUX
Explosion-proof sign ExdibIIB T6 Gb
Protection level IP65
Explosion proof number CNEx15.2204
Normal operating temperature -20℃～40℃
environment humidity ≤85%RH
battery model YC-4N2.0 14.8V
The BJF9003 portable searchlight meets the needs of small fire lighting and signals for fire, railway, power, public
security, oil fields, petrochemical, military, industrial and mining companies and various field work sites.
Used in flammable and explosive places as signal indications, safety warnings, and work lighting.
1. Energy saving of light source: Adopting imported high-efficiency LED, it has the characteristics of long life,
less energy consumption, energy-saving and high-efficiency, and soft spotlight.
2. Stable quality: high energy, no memory, high battery capacity, environmental protection, stable charge and
discharge performance, low self-discharge rate; use imported high-hardness aluminum alloy material, with strong
3, the use of flexible: easy to carry, can be handheld, lumbosacral, hat, use pulse dimming technology, adjustable
focus, light and work light optional; beautiful appearance, small size, light weight.
4, smart protection: built-in low voltage protection.
1, when the use of direct touch switch on the back cover, a file light, second gear low light, third gear off, long
press for the strobe.
2. After the first few uses, the charging time is 8-10h. Afterwards, it can be charged in time according to the
normal charging time to ensure that the battery is always in full power. Once fully charged, it can be used anytime
within 30 days. If
Do not use for a long time, charge 8 hours before use.
3, in use, if the power is about to run out, the prompt circuit will make the light brightness momentarily dark, and
cut off the power automatically in about 10 minutes, this time should stop using and charge in time.
4, the charger model is 3P10, its built-in charging protection device, two charging sockets on the back cover of the
lamp is not divided into positive and negative, as long as the output plug of the charger can be inserted into the
charging socket can be, the finger on the charger
The indicator light is red to indicate that charging is in progress, and the red color to green indicates full charge.
Simple failure analysis: light bulb is not lit
Cause: The light source is damaged, the switch is in poor contact, or the battery is low.
Warning: Charging should be done in time after each use.
1. It is forbidden to place the transparent part of the lamp downwards after the lamp is turned on; do not direct the
light to the human eye (a strong light may cause damage to the human eye).
2. Do not disassemble the structural parts of the lamp, especially the sealing structure.
3. Do not charge or disassemble the housing in an explosive atmosphere. Products that pass the explosion-proof
inspection are not allowed to replace or modify the components and structures that affect the explosion-proof