Welcome to Jiujiang fire fighting equipment Co., Ltd
ADD：No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
Jiujiang fire fighting equipment Co., Ltd © CopyRights
Jiujiang fire fighting equipment Co., Ltd
Fire extension ladder TEZ6
Working length: 6m
Contraction length: 3.81m;
Shrink thickness: 140mm;
Shrink width: 420mm;
Minimum ladder width: 315mm;
Ladder spacing: 280mm;
Horizontal bending residual deformation ratio: 0.3%;
Tiling orange residual deformation ratio: 0.16%;
Side swing residual deformation ratio: 0.15%;
The fire-resisting bar ladder is made of high-quality tough bamboo and processed by special techniques. It is made
of multi-layers and pressed together. It can be used for firefighting and rescue when it is used to rescue people and
extinguish fires. Especially in the city where there is no climbing car and the firefighting channel is narrow and
the climbing car cannot reach the fire, the ladder can cooperate with fire fighting and disaster relief. It can also
be used for various ascent operations such as factories, ascending maintenance, mines, and multi-storey buildings.
1.The maximum number of ladder users is two person.
2. The safe use angle of the ladder is 70°-76°, and the best use angle is 75°.
3. After the ladder is lifted against the wall, the ladder rope should be stretched and tied up on the ladder, and
then the ascending person can climb the ladder.
4. Ladder ladders should stand between the ladder and the wall and use both hands to hold the outer edges of the two
side panels. When the work is completed, the hands and feet of the guardians must leave the ladder so as not to cause
an accident when the ladder falls.
5. Ladder is forbidden to hang on the ladder.
6. It is forbidden to pass the bridge after the ladder has been opened.
7. As far as possible during the fire fighting, the ladder should be leaned against the external wall or firewall of
the building. When using a fire ladder near an open fire area, apply water gun cooling protection.