简体中文

Welcome to Jiujiang fire fighting equipment Co., Ltd 

ENGLISH

jjxf@jjxf.com.cn

400-0792-119

Follow us

ADD:No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
TEL:400-0792-119
FAX:0792-8578766
E-MAIL:
jjxf@jjxf.com.cn

CONTACT US

Jiujiang fire fighting equipment Co., Ltd  © CopyRights

Jiujiang fire fighting equipment Co., Ltd 

>
>
>
Fire extension ladder TSL15

Products

Name

Fire extension ladder TSL15

I want to make an inquiry
Parameters
Performance
Instructions
Precautions
The video
Corresponding parameter set not found, please add it in property template of background

Model no.

Height

Step distance

Minimum width

Weight kg

TSL15

15+/-0.3

300+/-2

350+/-4

92+/-7.5

TSL12

12+/-0.3

300+/-2

350+/-4

80+/-6.5

 

Fire ladder TSL15 is made of high-strength aluminum alloy material. It is mainly used in small and medium-sized

cities without high-lift cars and ordinary ladders. It is an indispensable tool for firefighters to climb to save

people and put out fires. It is also suitable for factories, institutions, military units, shops, electricians,

installers, and municipal construction personnel to climb the work. It is widely used.

1. According to the actual needs, determine the working height required for the ladder, and then determine the

position of the ladder on the ground. The distance from the wall is about 1/4 of the required working height, and

the two supporting rods

Open, so that the ladder is inclined toward the wall, that is, the angle with the ground is about 75 °.

2. Pull the pull rope downwards. At this time, the middle ladder and the upper ladder will rise at the same time.

When the height is reached, loosen the rope upwards (note that the hand does not leave the rope at this time), then

the foot will automatically Support

On the next step, tie the rope to any ladder on the next section to increase the safety factor of the ladder, and the

hand can leave the drawstring. Then lift the two support rods on the ground to make appropriate adjustments.

Reaching back to the ground, the entire ladder can be placed against the wall. The ladder personnel stand on the side

of the wall to protect the ladder, and then they can climb.

3. When the work needs to be lowered, pull the pull rope down to raise the ladder by about 15 cm, so that the legs

leave the ladder, and then slowly pull the rope upwards, and the ladder will drop and condense. Can not be suddenly

put at this time

Remove the rope and avoid the ladder falling freely and being damaged. The correct method is to alternately loosen

the rope with two hands, so that the ladder slowly descends to complete condensation and then tie the drawstring to

the ladder.

1. The maximum number of people using the ladder is two.

2. The safe use angle of the ladder is 70°~76°, and the best use angle is 75°.

3. The support rods on both sides of the ladder should be used at the same time and the support angle is the same.

4. After the ladder is raised against the wall, the ladder rope should be tightened and tied on the ladder to be able

to climb the ladder.

5. The ladder person should stand between the ladder and the wall, and use both hands to hold the outer edge of the

side panels on both sides. When the work is completed, the ladder personnel must leave the ladder to prevent the

ladder from colliding when the ladder is lowered.

ACCIDENT.

6. It is strictly forbidden to hang up the ladder to work on the ladder.

7. It is strictly forbidden to pass the bridge after the launch.

8. In the fire fighting battle, try to lean the ladder on the outer wall or firewall of the building. When using the

fire ladder near the open fire area, apply water gun cooling protection.

9. Fire-fighting rescue ladders and training ladders should be stored separately and markedly marked.

暂未实现,敬请期待
暂未实现,敬请期待
Previous article