Welcome to Jiujiang fire fighting equipment Co., Ltd
ADD：No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
Jiujiang fire fighting equipment Co., Ltd © CopyRights
Jiujiang fire fighting equipment Co., Ltd
Hydraulic ram GYCD-120/450~750-B
|Working pressure MPa||63|
|Maximum support force KN||120|
|Support length mm||750|
Double pipe single connector
(workable with pressure )
It meets the standard requirements of GB/T 17906-1999 "General technical conditions for hydraulic rescue tools". It
is used for emergency rescue in disaster and accident sites. The outer surface of the ejector is smooth and flat,
without burrs and processing defects, and the ferrous and non-ferrous metal surfaces are rust-proofed. Double pipe
single joint for pressure operation
1. Take out the top stabilizer and connect the top stabilizer to the power source (motorized hydraulic pump or manual
2. Control the extension and retraction of the piston of the stabilizer by rotating the reversing handle to achieve
Support the top.
Reversing handle: Rotate left and right by hand during operation to control piston expansion and contraction.
The handle on the back of the hand automatically returns to the middle position, the ejector stops working and acts
as a self-locking
3. When the top stabilizer is used, the pressure inside the stabilizer should be removed and the piston should be
4. After use, check the parts of the stabilizer to ensure that it is stored intact.
In the event of a malfunction, immediately stop the machine and lock the machine, and quickly check the cause of the
malfunction. Operation that affects machine stability is prohibited.