简体中文

Welcome to Jiujiang fire fighting equipment Co., Ltd 

ENGLISH

jjxf@jjxf.com.cn

400-0792-119

Follow us

ADD:No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
TEL:400-0792-119
FAX:0792-8578766
E-MAIL:
jjxf@jjxf.com.cn

CONTACT US

Jiujiang fire fighting equipment Co., Ltd  © CopyRights

Jiujiang fire fighting equipment Co., Ltd 

>
>
>
>
Fire-fighting protective clothing ZFMH-JX J

Products

Name

Fire-fighting protective clothing ZFMH-JX J

I want to make an inquiry
Parameters
Performance
Instructions
Precautions
The video
Corresponding parameter set not found, please add it in property template of background

Outer layer, waterproof breathable layer (heat insulation layer) and comfort layer;

(1). The outer layer of the product adopts IBN Lanqi and the mass per unit area is (210 ± 10.5) g/m2;

Flame retardancy: Longitudinal burn time 0s, loss length 29mm, latitudinal afterflame time 0s, loss length 24mm;

Breaking strength: 1222N in the longitudinal direction and 1126N in the latitudinal direction;

Tear strength: longitude 324.2N, latitude 289.6N;

Thermal stability: rate of change 1.0%

Color fastness: 4 washable stains, 4 water-resistant friction.

(2). Waterproof breathable layer (insulation layer) using aramid non-woven fabric + flame retardant PTFE film,

DYZ14-2,mass per unit area (125 ± 6.25) g/m2);

Flame-retardant properties: Longitudinal continuous burning time 0s, loss length 36mm, laminar continuous burning

time 0s, loss length 39mm;

Hydrostatic pressure:>50kPa;

Water vapor transmission rate: 6512 (g/(m2..24h));

Oil Repellent Performance: Level 4;

Thermal stability: change rate 2.0%;

(3). The comfort layer adopts IBNA TV120 and the mass per unit area is (120±6)g/m2;

Flame retardancy: Longitudinal burn time 0s, loss length 32mm, zonal afterflame time 0s, loss length 27mm;

Breaking strength: longitude 474.7N, latitude 377.9N;

Thermal stability: rate of change 1.0%;

(4). reflective tape with 3M reflective tape;

Flame Retardant: Longitudinal Burning Time 0s, Loss Length 25mm

          Latitude continuous burning time 0s, loss length 24mm;

(5). The outer reinforcing material adopts PM-2013FB and the mass per unit area is (380±20)g/m2;

Flame Retardant: Longitudinal burn time 0s, loss length 30mm

Latitude continuous burning time 0s, loss length 23mm;

Overall protective performance 28.2cal/cm2;

Needle density: bright and dark line 13 needles / 3cm;

Joint breaking strength: longitudinal direction 1151N, latitude 876.1N;

Color difference: not less than 4

The whole clothing weight ≤ 3kg

   For body protection, with flame retardant, waterproof and breathable, heat insulation, anti-static and

strong marking performance, composed of the outer layer, waterproof breathable layer, insulation layer and

comfort layer;

(1). the clothing should be cleaned immediately after wearing.

(2). washing should be as much as possible to wash the surface layer. It can be washed with neutral detergent, then

dry and then cool after washing: if drying, the temperature should not exceed 60 ℃ when drying, in order to prevent

the air permeation layer from blocking the micropores and affect the air permeability effect.

(3). It is forbidden to repair the garment privately. If damaged, it must be returned to the factory for repair.

(4). clothing should be stored in a ventilated and dry room, avoid prolonged exposure to the sun, avoid storing with

dangerous chemicals, and store the whole box on a board or shelf to prevent dampness. 

(1). guard against paralysis psychology, because firefighters protective clothing has the good heat insulation

performance, the firefighter may reduce the sensitivity to the heat wave after wearing, easy to produce the

paralytic psychology. Please be careful not to lower your vulnerability to fire when working. Do not expose your

body, and fire fighters may be burned unwittingly.

(2). in the presence of chemical dangerous goods, chemical gas, radioactive hazards and other environments

prohibited to use alone, should wear appropriate protective equipment.

(3). No contact with high-temperature objects or metals to avoid injury to operators after clothing damage.

(4). Water gun and spray protection must be used in the working environment when close to the flame and in high

heat radiation. 

暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article