Welcome to Jiujiang fire fighting equipment Co., Ltd
ADD：No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
Jiujiang fire fighting equipment Co., Ltd © CopyRights
Jiujiang fire fighting equipment Co., Ltd
Fire safety belt FZL-YD-900 (1.3m)
The webbing of the safety belt is an entire structure consisting of webbing, pin buckles, buckles, and two pull tabs.
Webbing width is 70mm. The belt of the safety belt is matched with the webbing and easy to check with the naked eye;
the suture interface and the suture end back seam are not less than 13mm; the line, the stitch is straight, neat,
no obvious bending or pile, no jump stitch, open stitch, break line. The buckle on the belt makes it easy to adjust
the length of the seat belt, and it can be worn quickly without loosening or slipping. No melting or coking occurs
at high temperatures. All metal parts are corrosion-resistant and anti-static.
Design load: 1.33kN
Belt weight: ≤0.85kg
Packing size: 60×30×35cm
Protective device for firefighters to ascend and rescue themselves, made of polyamide fiber or polyester fiber and
high-strength metal parts
1. Attach the waist belt to the waist. After the tail is fitted with the inlet head, it must be passed through the
buckle so that it will not affect the flexibility and safety of the action.
2. With two semi-circular pull rings, in normal use, a safety hook can be installed on a pull ring. If the person to
be lifted should be equipped with a safety hook on the two pull rings, which will help the staff to maintain balance. .
1.Safety belts should not be exposed to high temperatures above 120°C, acids and other chemicals, and sharp objects.
2. The safety belt is valid for two years from the date of delivery. The safety belt should be checked regularly and
checked every 3 months if the safety belt has defects such as breakage, discoloration, buckles, damage to the pull
ring and metal parts. Serious corrosion, etc., should replace the new belt and scrap the old belt.