Welcome to Jiujiang fire fighting equipment Co., Ltd
ADD：No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
Jiujiang fire fighting equipment Co., Ltd © CopyRights
Jiujiang fire fighting equipment Co., Ltd
fire-fighting protective clothing ZFMH-JX K(DRD)
(1).The outer layer of the product adopts IBNA Blue Shield and the mass per unit area is (230 ± 11.5) g/m2;
Flame-retardant properties: Longitudinal burn time 0s, loss length 21mm, latitudinal afterflame time 0s, loss length
Breaking strength: Longitude 2868N, latitude 2600N;
Tear strength: warp 1058N, latitude 744.6N;
Moisture resistance: Grade 3, thermal stability: rate of change 1.0%
Color fastness: 4 washable stains, 4 water-resistant friction.
(2). Waterproof breathable layer (insulation layer) using aramid non-woven fabric + flame retardant PTFE film,
DYZ14-1, mass per unit area (108 ± 5.4) g / m2);
Flame retardancy: Longitudinal burn time 0s, loss length 39mm, latitudinal afterburn time 0s, loss length 48mm;
Water vapor permeability: 5879 (g/(m2..24h));
Oil Repellent Performance: Level 4;
Thermal stability: change rate 2.0%;
(3). The comfort layer adopts IBNA TV120 and the mass per unit area is (120±6)g/m2;
Flame retardancy: Longitudinal burn time 0s, loss length 43mm, latitudinal afterburn time 0s, loss length 46mm;
Breaking strength: longitude 408.9N, latitude 323.5N;
Thermal stability: rate of change 1.0%;
(4). reflective tape with 3M reflective tape;
Flame Retardant: Longitudinal Burning Time 0s, Loss Length 25mm
Latitude continuous burning time 0s, loss length 24mm;
(5). Life-saving towing belt, specifications (25 ± 2) mm
Flame Retardant: Longitudinal burn time 0s, loss length 1mm
Latitude continuous burning time 0s, loss length 2mm;
Thermal stability: change rate 0%;
Expansion time: 5s;
Breaking strength: 8419N;
(6). The outer layer of reinforcing material adopts diamond-shaped jacquard flame-retardant and wear-resistant cloth,
and the mass per unit area is (360±36) g/m2;
Flame Retardant: Longitudinal Burning Time 0s, Loss Length 9mm
Latitude continuous burning time 0s, loss length 8mm;
Thermal stability: rate of change 0%
Overall protective performance 28.2cal/cm2;
Needle density: bright and dark line 13 needles / 3cm;
Joint breaking strength: warp direction 1436N, latitude 1007N;
Color difference: not less than 4
The whole clothing weight ≤3kg
For body protection, with flame retardant, waterproof and breathable, heat insulation, anti-static and strong
marking performance, composed of the outer layer, waterproof breathable layer, insulation layer and comfort layer;
(1). the clothing should be cleaned immediately after wearing.
(2). washing should be as much as possible to wash the surface layer. It can be washed with neutral detergent, then
dry and then cool after washing: if drying, the temperature should not exceed 60 ℃ when drying, in order to prevent
the air permeation layer from blocking the micropores and affect the air permeability effect.
(3). It is forbidden to repair the garment privately. If damaged, it must be returned to the factory for repair.
(4). clothing should be stored in a ventilated and dry room, avoid prolonged exposure to the sun, avoid storing with
dangerous chemicals, and store the whole box on a board or shelf to prevent dampness.
(1). guard against paralysis psychology, because firefighters protective clothing has the good heat insulation
performance, the firefighter may reduce the sensitivity to the heat wave after wearing, easy to produce the
paralytic psychology. Please be careful not to lower your vulnerability to fire when working. Do not expose your
body, and fire fighters may be burned unwittingly.
(2). in the presence of chemical dangerous goods, chemical gas, radioactive hazards and other environments
prohibited to use alone, should wear appropriate protective equipment.
(3). No contact with high-temperature objects or metals to avoid injury to operators after clothing damage.
(4). Water gun and spray protection must be used in the working environment when close to the flame and in high