Welcome to Jiujiang fire fighting equipment Co., Ltd
ADD：No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
Jiujiang fire fighting equipment Co., Ltd © CopyRights
Jiujiang fire fighting equipment Co., Ltd
Fire Safety Belt FZL-DD-I-JJ3
The load-bearing ribbon width of the sling: 45mm
Fire safety sling this product is a kind of sling with metal parts around the human body. It is used to bear the human
weight of rescue workers and prevent them from falling down
The full sling consists of a belt, buckle, and other items that can be adjusted to fit to the person's body and can be
pulled when falling and braking.
Before use, in order to gain the biggest security protection, please read the instructions carefully and use safety
equipment in the following way, if not the correct use of falling protection articles, is likely to cause is very
strict Heavy consequences!
1. Check the safety sling
Hold the d-ring buckle on the back of the seat belt liner to ensure the ribbon is not wrapped together.
Start wearing safety suspenders
Slide the safety sling over your arms to your shoulders to ensure that all the straps are unknotted and freely
suspended. The shoulder strap must be vertical and not near the center of the body.
3. Leg webbing
Grab the straps and attach them to the fasteners on the straps on either side of the hips. Insert the excess length
of the ribbon into the adjusting ring.
4. Breast ribbon
Attach the bra straps to each other through a jacketed clasp. The chest band must be 15cm below the shoulder.
The excess length of the ribbon is passed into the adjusting ring.
5. Adjust your seat belt
Shoulders: start from the shoulders and adjust the full body ribbon to make sure the leg ribbon is just below the hips
and the back d-ring is between the shoulder blades.
Legs: adjust the leg webbing. Try to do a one-leg front stretch and a half squat. Adjust to make the two legs webbing
the same length.
Chest: the chest ribbon should be crossed in the middle of the chest and about 3 fingers wide from the base of the
1. Conduct inspection before each use to ensure that personal protective equipment and other additional equipment are
in good condition.
2. Avoid the use of suspenders on worn or sharp surfaces.
3. In case of water or ice, the sling will become more sensitive to wear. Please double confirm the safety.
4, use and storage temperature shall not exceed 80 ℃.
5. It is strictly prohibited to repair or change the design by yourself.
6. Please consider the rescue measures in advance when using it.
Taken the warning
If the following situations occur, the sling is prohibited to use:
Over design load
The seam was damaged
The tension ring and the load-bearing ribbon (the ribbon that holds the tension ring) are damaged
The buckle is not working properly
Prior contact with other active substances or acids
There is no guarantee of safety