Welcome to Jiujiang fire fighting equipment Co., Ltd
ADD：No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
Jiujiang fire fighting equipment Co., Ltd © CopyRights
Jiujiang fire fighting equipment Co., Ltd
Hose trailer JJXF-SDTC-1
Vehicle net weight 55Kg
Water reel 10X20 meters/disc (80 water tapes)
Overall size (length, width, height) 900X1000X1400mm
The water belt trailer JJXF-SDTC-1 is a practical new-type water belt trailer. It has the advantages of being capable
of winding up a large number of coils at a time, beautiful appearance, light weight and practicality, and being able
to be matched with fire engines. Is a suitable water source
Use away from fire sites. Can effectively reduce the load of firefighters, a firefighter can easily carry multiple
fire hoses at the same time, and use fire hose trailers to move fire hoses also
It is very labor-saving, so it can expedite the preparatory work for fire-fighting and expedite the fire-fighting
task so as to greatly increase the fire-fighting efficiency. On the other hand, it can be connected in advance with
a few plates to save time.
One step to improve fire-fighting efficiency.
1. When using, manpower dragging a trailer with a hose, you must press the brake lever by hand to drag the car
forward. The car can be placed upright, or it can be placed lying down, and the car can be leveled as needed.
2. When the hose is closed, insert a card of the hose into the buckle of the hose. Turn the handle by hand to wind
the hose. It is also possible to turn the red disc directly by hand to wind up the hose, if it is found to turn
In the case, check whether locking pin 2 is open. When a water strip is collected, the next strip of water can be
connected directly through the buckle until the trailer is full of water, up to a maximum of 10 plates and 20
Hose. Snap the last end of the hose directly into the buckle of the hose, and then fasten the Velcro.
3. For use with fire engines, when on the train, align the F-hook to the hook of the fire truck hooked on the rear
pedal of the fire engine and push the T-shaped handrail so that the F-hook is locked on the fire truck. Above, Ran
After the locking lever is opened, the F-hook locking lever is caught. Take off the first step to open the locking
bar safety pin, and then use the hand to move the F-type hook locking lever, the cart can be towed away, and then
walk along the trolley
1. If it is not used for a long time, it should be placed in a ventilated and dry place. The complete performance of
the entire vehicle needs to be checked once a month to ensure the integrity of the vehicle's functionality at the
time of use.
2. The sprocket should wipe the lubricating oil, and the transmission parts need to wipe the lubricating oil and
rust-proof oil regularly.
3, after use, wipe the outside of the vehicle as much as possible to prevent the vehicle body from rusting when it
is not in use for a long time in a humid environment.