简体中文

Welcome to Jiujiang fire fighting equipment Co., Ltd 

ENGLISH

jjxf@jjxf.com.cn

400-0792-119

Follow us

ADD:No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
TEL:400-0792-119
FAX:0792-8578766
E-MAIL:
jjxf@jjxf.com.cn

CONTACT US

Jiujiang fire fighting equipment Co., Ltd  © CopyRights

Jiujiang fire fighting equipment Co., Ltd 

>
>
>
>
Motor driven floating fire pump FTQ4.0/12.0

Products

Name

Motor driven floating fire pump FTQ4.0/12.0

I want to make an inquiry
Parameters
Performance
Instructions
Precautions
The video
Corresponding parameter set not found, please add it in property template of background

Type

single cylinder air cooled four stroke

Bore diameter * stroke

87.3×57.5mm

Maximum power and speed KW/rmin

12.5/3600

Displacement

344cc

Startup mode

Manual or electric start

Dimensions

760×760×450mm

Pump

Type

single stage single suction centrifugal pump

Maximum flow

70T/H

Rated flow rate

43T/H

Rated head

40m

 

 

Motorized firefighting pontoon pump FTQ4.0/12.0 uses American Billiton engine. It has the advantages of compact

structure, large horsepower, high lift, large flow, reliable performance, good stability, easy movement, strong

flexibility, complete functions, etc. It realizes remote control and electronic control start and can be manually

started. It concentrates on similar products at home and abroad. Advanced structure and excellent performance. It

is mainly used for fire rafting and fire fighting in low-lying pools, tunnels, underground facilities and other

places.

1. Place the machine on a hard, stable surface with an inclination of less than 15 degrees;

2. Check the oil level:

Unscrew the oil mark knob marked with the word "OIL". The oil to be added should be at the upper end of the oil

finger sawtooth. It is not necessary to add or lose.

3. Check the fuel tank oil level: Open the fuel tank and inject the gasoline to ensure that the oil level in the

fuel tank is not less than 2/3 when used. When the oil level is lower than 1/3, the machine cannot guarantee the

work. It is best to use more than 90# gasoline

Suitable;

4. Connect the water hose and water gun to put the pump into the water smoothly;

5. Turn on the engine power switch, pull the throttle to the medium and low speed state, rotate the start switch to

make the engine work; after the engine is stable, slowly increase to the medium and high speed state.

The engine power switch is pulled to the middle and low speed state, pulling the engine to pull the rope to make the

engine work, and slowly increase to the medium and high speed state after the engine is stable.)

6. When the machine is stopped, first adjust the engine throttle to the minimum state, and run it for one or two

minutes to turn off the engine power.

7, remote control operation of the floating boat pump:

(1) There are four buttons on the remote control, namely A, B, C, D, of which A starts, B turns off, C refuels, D

decelerates;

(2) Open the power switch on the floating boat pump;

(3) Press the remote control C button to add the throttle to the medium and low speed state. After the engine is

stable, slowly increase to the medium and high speed state. Press the A key to start, press the D key after starting.

Lower the throttle and wait for the engine to run smoothly. Press the C key to adjust the throttle to the appropriate

throttle position to start working;

(4) Stop the work Press the B button when the flame is turned off.

1. Read the Bailey engine instructions carefully.

2. Always turn off the floating pump power supply before injecting fuel.

3. It is forbidden to stay in the pump to avoid hydrolysis and damage the movement.

4. It is forbidden to keep the sediment in the water inlet to avoid damage to the sealed coil or mechanical seal.

5. It is forbidden to idling the floating boat pump for more than 2 minutes (to pump water as soon as possible)

6. It is forbidden to place the floating boat pump to a depth of less than 30 cm (distance from the water inlet to

the bottom of the water source)

7. It is forbidden to operate the floating boat pump without being taken care of.

8. After each use, clean the effluent battery.

9. After use, check the engine's gasoline, oil and air filters.

(1) Regular inspection to see if there is any fault.

(2) Do a good job of security.

(3) Regularly replace the mechanical water seal.

(4) If the usage interval is longer. Start the pump manually on a regular basis.

暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article