Welcome to Jiujiang fire fighting equipment Co., Ltd
ADD：No.1,Daqiao Road,Yujiahe,Lianxi District,Jiujiang City,Jiangxi province,China
Jiujiang fire fighting equipment Co., Ltd © CopyRights
Jiujiang fire fighting equipment Co., Ltd
Fire protection life jacket YB-F160
Basic project parameters
Automatic air bag material PTU polyether material
The total buoyancy acuity 180N
Manual charging time is no more than 5s
Buoyancy loss 24 hours buoyancy loss < 5%
YB-f160 is a kind of life saving garment, similar to vest design, made of natural buoyancy material and inflatable
air bag. The natural buoyancy material is imported NBR
High-density foam foam, outer use 420 d Oxford cloth, inflatable balloon use cloth, TPU air support upright in the
water and back two floating state, lithium battery directional light mounted on the jacket, the new structure
With high sensitivity, reliable performance and convenient installation, the lamp body adopts ABS plastic shell, and
the lamp cover adopts polycarbonate material, which has the characteristics of high strength, shock resistance and
good light transmission.Advanced circuit design, select into
With the advantages of long service life, high luminance and stable luminance, the electronic components and high
luminance LED lamp beads are provided.This lifejacket is an indispensable equipment for fire and rescue.
1. Check whether the life jacket is damaged before use.
2. Check the status of the automatic inflation device.
3. Check the cylinder.When an automatic inflator works, a cylinder containing gas will inflate the life jacket.Check
that the cylinder is properly sized and has not been used before.Inspection of cylinder, screw down the cylinder and
observe the solenoid plane.There is no part on the cylinder indicating whether the gas is full or not.If there is
any damage to the solenoid surface, the cylinder should be replaced.Additional description of cylinder.A: install
Before, incorrect installation of automatic inflation device will lead to immediate inflation;B: the cylinder can
only be inflated once and cannot be re-inflated for use.C: the protective coating on the outside of the cylinder
after being placed in the environment or used for a period of time
It may corrode and the cylinder will start to show some signs of rust.In this case, replace the cylinder.
4. How to use life jackets
1) wear the life jacket whistle bag outwards;
2) pull the zipper, tighten the front tie with both hands, and tie the neck well;
3) the foot strap is crossed and fastened on the front left and right sides;
4) after wearing, check each place for fastening.
5. Usage of position indicator light for lithium battery life jacket:
Immerse two metal contacts on lamps and lanterns into water, meet water to shine namely, leave water also can shine
all the time, if need not shine, leave lamps and lanterns water, press red switch button can close.
1. Avoid all unnecessary activities that will cause wear and tear on the life jacket.
2. Be careful when using around sharp objects.
3. Lifejackets shall be stored separately to prevent exposure to the sun, and shall not be mixed and stacked with
hard objects, sharp objects or other clothing, shall not be extruded, and shall not be exposed to acid, alkali or
other corrosive chemicals.