JJXF Fire Equipement Anti Fire Suit with Reflective Tape Fire Suit

JJXF fire equipement anti fire suit with reflective tape fire suit

strengthed  the shoulder, elbow, knee. Hem with large pockets, pocket bottom corners have a water drain hole. Reflecting sign belt, seam, sleeve seam, batwing joints in main stitch are double needle, and using the Fang anti- temperature line. Cuff trousers, leather bags, waterproof rib cuffs, and a thumb ring buckle design, rib cuff material for aromatic fiber. Elastic belt use strong elastic rubber band. Garment fit, with high protection grade, ightweight non-removable integrated  fire protective clothing.

Welcome to contact us if you have any questions

The product comply with  GA10-2002"firefighter protective clothing"and ZGZ-ZPJY-001 2009"Fireman fire fighting protective clothing mandatory inspection scope rules "standard .

To overcome the paralysis psychological

Fireman fire fighting protective clothing insulation performance may reduce the sensitivity of the firefighters on the heat wave ,easily lead to paralysis. Please note that ,do not reduce the vigilance of the fire harzard  in the fire, must not be exposed the body .If exposure or direct touch with the flame ,firefithers may be unwittingly burns .

Prohibited in the environment of hazardous chemicals, mustard gas, radioactive hazards alone should wear appropriate protective gear.

 Constituent

1,Fireman fire fighting protective  clothing have jacket and pants .T-shirt for the wide body structure, under the pants strap structure.

2,Not less than 50mm width of 360° reflective/fluorescent signs for easy indentification in the coat of protective clothing bust, hem, cuffs and bottom of trousers .

3,The collar design specific neck structure to prevent the flame injury.

4,All pockets are designed for a loose three dimensional ,in order to place a variety of communications equipment and fire tools .In addition ,the pocket at the bottom have a leaking hole.

5,The  protective clothing through clothing mandatory inspection of compliance.

6,

This protective clothing in the shoulder, elbow and knee bits used to strengthen the grid line processing .